HP LaserJet 4250 Printer

Error Codes and Support

Error:

10.XX.YY SUPPLY10.XX.YY SUPPLYMEMORY ERRORor10.XX.YY SUPPLYMEMORY ERRORFor help press ? Access deniedMENUS LOCKED
13.01.00. JAM IN TRAY x BAD DUPLEXERCONNECTION
13.02.00 JAM IN TOP BAD ENV FEEDERCONNECTION
13.03.00 JAM IN TRAY x CANNOT DUPLEX Check rear binorCANNOT DUPLEX Check paper
13.05.00 JAM IN TOP CARTRIDGE FAILUREFor help press ?alternates withRETURN FOR REPLACEMENTFor help press ?
13.06.00 JAM INSIDE REARDOOR CHOSEN PERSONALITYNOT AVAILABLEFor help press ?alternates withCHOSEN PERSONALITYNOT AVAILABLETo continue press "CheckMark Icon"
13.12.00 JAM INSIDE REARDOOR CLOSE TOP COVERFor help press ?
13.12.07jam in stapler DATA RECEIVEDTo print last page press "CheckMark Icon"
13.12.08jam in output device DETECTABLE SIZEIN TRAY XXFor help press ?alternates withDETECTABLE SIZE IN TRAY XXRecommend moveswitch to STANDARD
13.12.09 jam in output deviceNOTE: The stacker or stapler/stacker LEDblinks in amber. DISK DEVICEFAILUREalternates withReadyFor menus press "CheckMark Icon"
13.12.10 jam in output device NOTE: The event log records this errormessage as 13.12.0A.NOTE: The stacker or stapler/stacker LEDblinks in amber. DISK FILEOPERATION FAILED
13.12.11jam in output device NOTE: The event log records this errormessage as 13.12.0B.NOTE: The stacker or stapler/stacker LEDblinks in amber. DISK FILESYSTEM IS FULLalternates withReadyFor menus press "CheckMark Icon"
13.13.00JAM INSIDE DUPLEXER DISK ISWRITE PROTECTEDalternates withReadyFor menus press "CheckMark Icon"
13.1C.00FUSER JAM EIO X DISKNOT FUNCTIONALFor help press
13.20.00 JAM IN TOP ENVELOPE FEEDEREMPTY
13.21.00 JAM IN TOP FLASH DEVICEFAILUREalternates withReadyFor menus press "CheckMark Icon"
13.98.00 FLASH FILEOPERATION FAILEDalternates withReadyFor menus press "CheckMark Icon"
13.XX.YYDUPLEX JOB INTERRUPTEDFor help press ? FLASH FILESYSTEM IS FULLalternates withReadyFor menus press "CheckMark Icon"
13.XX.YYJAM For help press ? FLASH ISWRITE PROTECTEDalternates withReadyFor menus press "CheckMark Icon"
20 INSUFFICIENT MEMORY Incorrect
21 PAGE TOO COMPLEX INSERT OR CLOSETRAY XXFor help press ?
22 EIO XBUFFER OVERFLOW INSTALL CARTRIDGEalternates withFor help press ?
22 PARALLEL I/OBUFFER OVERFLOW INSTALL FUSERFor help press ?
40 EIO X BADTRANSMISSION LOAD TRAY XX{TYPE} {SIZE}For help press ?
41.3 UNEXPECTEDSIZE IN TRAY XX LOAD TRAY XX{TYPE} {SIZE}For help press ?alternates withLOAD TRAY XX{TYPE} {SIZE}To use anothertray press "CheckMark Icon"
41.XPRINTER ERROR Lower the optional binNote: The stacker or stapler/stacker LEDblinks in amber.
49.24.02printer error MANUALLY FEED{TYPE} {SIZE}For help press ?alternates with
49.XXXXPRINTER ERROR MANUALLY FEED{TYPE} {SIZE}To continue press "CheckMark Icon"
50.X FUSER ERROR NON HP CARTRIDGE DETECTED
51.XYPRINTER ERRORFor help pressalternates with51.XYPRINTER ERRORTo continue turn off then on NON HP CARTRIDGEDETECTEDalternates withReadyFor menus press "CheckMark Icon"
52.XYPRINTER ERROR OUTPUT BIN 1 FULLRemove all paperfrom binNOTE: The stacker or stapler/stacker LEDblinks in amber.
53.XY.ZZPRINTER ERRORTo continue press cancel job OUTPUT PAPER PATHOPENNOTE: The stacker or stapler/stacker LEDblinks in amber.
54.1 PERFORM PRINTER MAINTENANCEalternates withReadyFor menus press "CheckMark Icon"
55.XPRINTER ERROR Performingupgrade
56.1 printer error PERMANENT STORAGE ERROR
56.2 printer error Printing...REGISTRATION PAGE
57.3 EP fan failure RAM DISK DEVICEFAILUREalternates withReadyFor menus press "CheckMark Icon"
57.4 main fan failure RAM DISK FILEOPERATION FAILEDalternates withReadyFor menus press "CheckMark Icon"
57.7 duplex fan failure RAM DISK FILESYSTEM IS FULLalternates withReadyFor menus press "CheckMark Icon"
57.X RAM DISK ISWRITE PROTECTEDalternates withReadyFor menus press "CheckMark Icon"
58.XPRINTER ERROR RECEIVINGUPGRADE
59.2Main motor Rotation error REINSERT DUPLEXER
59.4Print-cartridge-motor rotation error REPLACE CARTRIDGEalternates withFor help press ?
59.XYPRINTER ERROR Resendupgrade
60.2printer error SIZE MISMATCH INTRAY XXFor help pressalternates withReadyFor menus press "CheckMark Icon"
60.3Tray 3 lifter motor failure Standard output bin fullRemove all paper from bin
60.4Tray 4 lifter motor failure STAPLER LOW ON STAPLESFor help pressNOTE: The stapler/stacker LED iscontinuously illuminated green (this errorapplies to the stapler/stacker only).
62NO SYSTEMTo continue turn off then on STAPLER OUT OF STAPLESFor help pressNOTE: The stapler/stacker LED blinks inamber (this error applies to the stapler/stacker only).
64PRINTER ERROR TOO MANY INSTALLEDTurn power off and unistall a tray.
66.00.15EXTERNAL DEVICE FAILURENOTE: The stacker or stapler/stacker LEDis off. TOO MANY PAGES IN JOB TO STAPLENOTE: The stapler/stacker LED iscontinuously illuminated in green (this errorapplies to the stapler/stacker only).
66.12.XXoutput device failureNOTE: The stacker or stapler/stacker LEDis continuously illuminated in amber. TRAY XX CONTAINSUNKNOWN MEDIA
68.X PERMANENTSTORAGE FULL TRAY XX EMPTY{TYPE} {SIZE}alternates withReadyFor help press "CheckMark Icon"
68.X PERMANENTSTORAGE WRITE FAIL TRAY XX OPENFor help press ?alternates withReadyFor menus press "CheckMark Icon"
68.XPERMANENT STORAGE ERROR TRAY XX SIZE={XXXX SIZE}For help press ?
69.Xprinter error TRAY XX{TYPE} {SIZE}Size specified by useralternates withTRAY XX{TYPE} {SIZE}To change typepress "CheckMark Icon"
79.XXXXPRINTER ERROR TRAY XX{TYPE} {SIZE}To change typepressalternates withTRAY XX{TYPE} {SIZE}Size detected by tray
8X.YYYYEIO ERROR USE INSTEAD?TRAY X: {TYPE}{SIZE}