HP Color LaserJet CM3530 MFP Printer

Error Codes and Support

Error:

10.00.YY Supply memory error Cartridge Error-Replace color cartridgesReinstall then turn off and then on
11.XX Internal clock error To continuetouch OK Chosen personality not available. Tocontinue touch OK.
13.01 Jam In Tray 3 Cleaning disk {X}% complete Do notpower off
13.04 Jams inside right door Close front or right doors
13.05 Fuser area jam Close lower-right door
13.06 Fuser area jam Document feeder cover open
13.12 Jam inside right door DOCUMENT FEEDER EMPTY
13.13 Jam inside right door Document feeder pick error
13.1C Fuser Wrap Jam EIO {X} disk not functional
13.20 Jams inside right door EIO Not initialized
13.21 Jams inside right door E-MAIL GATEWAY DID NOT ACCEPT THEJOB BECAUSE THE ATTACHMENT WASTOO LARGE
13.2E Paper Late Jam Near Fuser atSensors F - J E-MAIL GATEWAY DID NOT RESPOND
13.30.00 Jam in Tray 1 E-MAIL GATEWAY REJECTED THE JOBBECAUSE OF THE ADDRESSINGINFORMATION
13.30.00 Jam in Tray 2 Error
13.30.00 Jam inside lower right door Fax is disabled ignoring call
20 INSUFFICIENT MEMORY To continuetouch OK Flatbed cover open
22 - USB I/O buffer overflow To continuetouch OK Gateways failed
22 EMBEDDED I/O BUFFER OVERFLOWTo continue touch OK HP SECURE HARD DRIVE DISABLED
30.01.02 Scanner failure Image CRC error
30.01.03 Scanner failure Incompatible fuser
30.01.08 Scanner failure Incompatible supplies
30.01.14 Scanner failure INFLATE FAILURE
30.01.18 Scanner failure Initializing scanner
30.01.19 Scanner failure Install {color} cartridge
30.01.23 Scanner failure Install fuser
30.01.25 Scanner failure Install supplies
30.01.36 Scanner failure Install transfer unit
30.01.39 Scanner failure Insufficient memory to load fonts/data{device} To continue touch OK
30.01.40 Scanner failure Internal disk not found
30.01.41 Scanner failure Internal disk not functional
30.01.42 Scanner failure Internal disk not initialized
30.01.43 Scanner failure Jam in document feeder
30.01.44 Scanner failure Load Tray {XX} {type} {size} To useanother tray touch OK
30.01.45 Scanner failure Load Tray {XX}: [type] [size]
30.01.46 Scanner failure Load Tray 1: [Type] [Size] To continuetouch OK
40 Embedded I/O Bad Transmission Tocontinue touch OK Manually feed {type} {size}
41.3 Load Tray {XX}: [Type] [Size] Manually feed output stack Then touchOK to print second sides
41.5 Load Tray {XX}: [Type] [Size] To useanother tray touch OK Non-HP supply installed
41.X ERROR Order {color} Cartridge
50.1 FUSER ERROR Order Fuser Kit
50.2 FUSER ERROR Order roller kit-Less than XXXX pages
50.3 FUSER ERROR Order Supplies
50.4 FUSER ERROR Order toner collection unit
50.5 FUSER ERROR Order Transfer Kit
50.7 FUSER ERROR Order transfer kit Less than XXXX pages
50.8 FUSER ERROR Output Bin Full Remove all paper from bin
50.9 FUSER ERROR Performing upgrade {Device}
51.1Y Error To continue turn off and thenon RAM disk not initialized
51.2Y Error To continue turn off and thenon Remove All Print Cartridges
52.00 Error To continue turn off and thenon Remove At Least One Print Cartridge
52.20 Error To continue turn off and thenon REMOVE CARTRIDGE LOCKS
53.10.0X Unsupported DIMM Replace {color} Cartridge
54.01 Error Replace {color} cartridge - To continuetouch “OK”
55.00.YY DC Controller CommunicationError To continue turn off and then on Replace DIMM {X} MEM test failure
55.01.YY DC Controller Memory Error Tocontinue turn off and then on Replace document feeder kit
55.02.YY Outgoing Parity Error Tocontinue turn off and then on Replace fuser kit
55.03.YY No Engine Response Tocontinue turn off and then on Replace fuser kit To continue touch OK
55.04.YY Communications Timeout Tocontinue turn off and then on Replace roller kit
55.05 ENGINE FIRMWARE RFU ERROR Replace Supplies - Using black
56.01 - Illegal input To continue turn offand then on Replace transfer kit
56.02 - Illegal output To continue turn offand then on Replace transfer kit To continue touchOK
57.03 Error To continue turn off and thenon Resend external accessory firmware
57.04 Error To continue turn off and thenon Resend upgrade
57.07 Error To continue turn off and thenon RFU LOAD ERROR
59.30 Error To continue turn off and thenon ROM Disk Not Initialized
59.40 Error To continue turn off and thenon Rotating {color} Motor
59.5Y ERRORTo continue turn off then on Rotating Motor - To exit press STOP
59.6Y ERRORTo continue turn off then on Sanitizing Disk {X}% Complete Do notpower off
59.B0 ERRORTo continue turn off then on SCAN FAILURE
59.BO CLEANING MOTOR ERRORREPLACE TONER COLLECTION UNIT Tray {XX} empty: [type] [size]
59.C0 Error To continue turn off and thenon Tray {XX} open
59.F0 ERROR Type Mismatch In Tray {XX}
59.XY ERROR To continue turn off then on Unable to connect
60.02 Tray 2 lifting error UNABLE TO COPY
60.03 Tray 3 lifting error Unable to mopy job
68.X Storage error settings changed Tocontinue touch OK. UNABLE TO SEND
69.X Error To continue touch OK. UNABLE TO SEND FAX
79.XXXX - ERROR To continue turn off andthen on Unauthorized supply in use
8X.YYYY EIO ERROR To continue turn offand then on Unsupported data on [FS] DIMM in slot
8X.YYYY EMBEDDED JETDIRECT ERROR Unsupported USB accessory detected
ABCDEFGHIJK 100000000000 Upgrade complete To continue turn offand then on
ACTION NOT CURRENTLY AVAILABLEFOR TRAY X TRAY SIZE CANNOT BE ANYSIZE/ANY CUSTOM USB ACCESSORY UNAVAILABLE
Authentication required USB HUBS NOT FULLY SUPPORTED
Authentication required to use thisfeature USB needs too much power
Bad optional tray connection USB Not Initialized
Card Slot Device Failure - To Clear TouchOK USB storage {X} is not functional
Card Slot file operation failed To cleartouch OK USB storage {X} removed
Card Slot is write protected To clear touchOK USED SUPPLY IN USE
Card Slot Not Initialized Windows login required to use this feature
Cartridge Error – Replace Black Cartridge