HP LaserJet 5200 Laser Printer - Monochrome - 1200 x 1200 dpi Print - Plain Paper Print - Desktop - 35 ppm Mono Print - 350 sheets Input - Manual Duplex Print - USB

Error Codes and Support

Error:

{BINFULL} FULL CLOSE TOP COVER AND FRONT DOOR
10.32.YY UNAUTHORIZED SUPPLY CODE CRC ERROR
10.XX.YY SUPPLY MEMORY ERROR Creating...CLEANING PAGE
11.XX INTERNAL CLOCK ERROR DATA RECEIVEDalternates withReady
13.12.00 JAM INSIDE DUPLEXER Date/Time=[YYYY]/[MMM]/[DD] [HH]:[mm]To change press (Continue)To skip press STOP
13.XX.YY JAM IN TRAY 1 Duplexer Error Remove Duplexer
13.XX.YY JAM IN TRAY 2 EIO {X} Disk Not Functional
13.XX.YY JAM IN TRAY X External Accessory Not Supported
13.XX.YY JAM INSIDE FRONT DOOR GENUINE HP SUPPLIES DESIGNED FOR{PROD}
13.XX.YY JAM INSIDE REAR DOOR Incorrect
13.XX.YY JAM INSIDE TOP COVERalternates withRemove print cartridge INFLATE FAILURE
20 INSUFFICIENT MEMORY INSERT OR CLOSE TRAY XX
21 PAGE TOO COMPLEX INSTALL BLACK CARTRIDGE
22 EIO X BUFFER OVERFLOW INSTALL FUSER
22 EMBEDDED I/O BUFFER OVERFLOW INSUFFICIENT MEMORY TO LOADFONTS/DATA
22 PARALLEL I/O BUFFER OVERFLOW LOAD TRAY X {TYPE} {SIZE}
22 USB I/O BUFFER OVERFLOW LOAD TRAY XX {TYPE} {SIZE}
40 EIO X BAD TRANSMISSION LOAD TRAY XX {TYPE} {SIZE} - MOVETRAY DIAL WHEN LOADING TRAY
40 EMBEDDED I/0 BAD TRANSMISSION MANUALLY FEED {TYPE} {SIZE}
41.3 UNEXPECTED SIZE IN TRAY X MANUALLY FEED OUTPUT STACK
41.5 UNEXPECTED TYPE IN TRAY X MEM TEST FAILURE REPLACE DIMM 1
41.X ERROR NON HP SUPPLY IN USE
49.XXXXX ERROR NON HP SUPPLY INSTALLED
50.X FUSER ERROR ORDER CARTRIDGE LESS THAN XXXXPAGES
51.1Y PAPER PATH JAM FRONT DOOR
52.XX.Y PAPER WRAPPED AROUND FUSER
53.10.01 ERROR UNSUPPORTED RAM Paused
54.XX ERROR Performing upgrade
55.XX.YY DC CONTROLLER ERROR PRINTING STOPPED
56.XX ERROR Printing... REGISTRATION PAGE
57.XX PRINTER ERROR Processing...SLOW MODE
58.XX ERROR RAM DISK DEVICE FAILURE
59.XY ERROR RAM DISK FILE OPERATION FAILED
62 NO SYSTEM RAM DISK FILE SYSTEM IS FULL
64 ERROR RAM DISK IS WRITE PROTECTED
68.X PERMANENT STORAGE FULL Ready {IP Address}
68.X PERMANENT STORAGE WRITE FAIL Receiving upgrade
68.X STORAGE ERROR SETTINGSCHANGED REINSERT DUPLEXER
79.XXXX ERROR REPLACE BLACK CARTRIDGE
8X.YYYY EIO ERROR Resend upgrade
8X.YYYY EMBEDDED JETDIRECTERROR RFU LOAD ERROR
Access Denied MENUS LOCKED SIZE MISMATCH IN TRAY XX
ACTION NOT CURRENTLY AVAILABLEON TRAY X Sleep mode on
BAD DUPLEXER CONNECTION STANDARD TOP BIN FULL
BAD OPTIONAL TRAY CONNECTION TRAY {X} OVERFILLED REMOVEEXCESS PAPER
Cannot Duplex Check Rear Bin TRAY XX EMPTY {TYPE} {SIZE}
Card slot {X} not functional TRAY XX OPEN
CHOSEN PERSONALITY NOTAVAILABLE TYPE MISMATCH IN TRAY XX
CLOSE REAR BIN Unauthorized supply in use