HP Color Laserjet 4730 Mfp Printer

Error Codes and Support

Error:

10.XX.YY Supplies Error Authentication required to use thisfeature
11.XX Internal clock error To continuetouch OK Check output device
13.01.00 JAM IN TRAY 1 Chosen personality not available. Tocontinue touch OK.
13.01.11 JAM INSIDE LOWER RIGHTDOOR Close drawer below Tray 1
13.02.00 JAM INSIDE RIGHT DOORS Close right doors
13.05.00 JAM INSIDE RIGHT DOORS Close small front door
13.06.00 JAM INSIDE UPPER RIGHTDOOR Corrupt Firmware In External Accessory
13.09.00 JAM INSIDE FRONT SMALLDOOR Corrupt Firmware In External Device
13.11.00 JAM INSIDE UPPER RIGHTDOOR Digital Send Communication Error
13.12.07 Jam In Stapler Digital Send server is not respondingContact administrator
13.12.08 Jam In Left Accessory Document feeder bin full
13.12.09 Jam In Left Accessory Document feeder cover open
13.12.10 Jam In Left Accessory Document feeder pick error
13.12.11 Jam In Left Accessory E-mail Gateway did not accept the jobbecause the attachment was too large.
13.13.00 JAM INSIDE RIGHT DOORS E-mail Gateway did not respond. Jobfailed.
13.21.00 JAM IN TRAY X E-mail Gateway rejected the job becauseof the addressing information. Job failed.
13.30.00 JAM INSIDE DRAWER BELOWTRAY 1 Error executing Digital Send job. Jobfailed.
13.31.00 JAM INSIDE UPPER RIGHTDOOR Folder list is full. To add a folder youmust first delete a folder.
13.XX.YY JAM IN OUTPUT AREA HP Digital Sending: Delivery Error
13.XX.YY Jam In Paper Path Incorrect {color} Cartridge
13.XX.YY JAM INSIDE OUTPUTACCESSORY BRIDGE Incorrect Supplies
20 INSUFFICIENT MEMORY To continuetouch OK Insert or close tray XX
21 PAGE TOO COMPLEX To continuetouch OK Install {color} cartridge
22 EIO X BUFFER OVERFLOW Tocontinue touch OK Install Fuser
22 EMBEDDED I/O BUFFER OVERFLOWTo continue touch OK Install supplies
30.00.01 Install Transfer Unit
30.01.01 Insufficient memory to load fonts/data{device} To continue touch OK
30.01.02 JAM IN DOCUMENT FEEDER
30.01.03 LDAP Server is not responding Contactadministrator
30.01.06 Left Output Bin Full
30.01.07 Load Tray 1 {type} {size}
30.01.08 Manually feed {type} {size}
30.01.10 Network connection required for DigitalSending. Contact administrator.
30.01.15 Non-HP supply installed
30.01.18 Novel login required
30.01.19 Order {color} Cartridge
30.01.22 Order Fuser Kit
30.01.23 Order staple cartridge
30.01.24 Order Supplies
30.01.25 Order Transfer Kit
30.01.29 Output Accessory Bridge Disconnected
30.01.36 Output Accessory Bridge Failure
40 BAD EIO X TRANSMISSION Tocontinue touch OK Output Bin {X} Full
40 BAD SERIAL TRANSMISSION Tocontinue touch OK Output paper path open
40 EMBEDDED I/O BAD TRANSMISSIONTo continue touch OK Password or name is incorrect. Pleaseenter correct login.
41.3 LOAD TRAY XX {TYPE} {SIZE} PIN is incorrect. Please re-enter PIN.
41.3 LOAD TRAY XX {TYPE} {SIZE} Touse another tray touch OK Please turn device off and install harddisk.
41.5 Unexpected Type In Tray {X} Reattach output bin
49.XXXXX ERROR To continue turn offthen on Reinstall Output Device
50.X FUSER ERROR Remove All Print Cartridges
51.1Y Printer Error Remove At Least One Print Cartridge
51.2Y Printer Error Replace {color} Cartridge
52.XY ERROR To continue turn off thenon REPLACE DIMM {X} MEM TEST FAILURE
53.XY.ZZ CHECK RAM DIMM SLOT {X}To continue touch OK Replace Fuser Kit
54.XX Printer Error Replace Staple Cartridge
55.XX.YY DC CONTROLLER ERROR Tocontinue turn off then on Replace Supplies
56.XX ERROR To continue turn off thenon Replace Supplies - Override in use
57.XX ERROR To continue turn off thenon Replace Supplies - Using black
58.XX ERROR To continue turn off thenon Replace Transfer Kit
59.XY ERROR To continue turn off thenon Rotating {color} Motor
60.X ERROR To continue turn off then on Rotating Motor - To exit press STOP
62 NO SYSTEM To continue turn off thenon SANITIZING DISK {X}% COMPLETE Donot power off
64 ERROR To continue turn off then on SCAN FAILURE Press 'Start' to rescan
65.00.15 Output Device Failure Size mismatch in tray XX
65.12.01 Output Device Failure SMTP Gateway
65.12.02 Output Device Failure Stapler Low On Staples
65.12.03 Output Device Failure The Digital Sending Service at {IPAddress} does not service this MFP.Contact administrator.
65.12.34 Output Device Failure The Digital Sending Service must beupgraded to support this version of theMFP firmware. Contact administrator.
65.12.35 Output Device Failure The folder you have entered is not avalid folder.
65.12.99 Output Device Disconnected There might be a document on theglass. If there is remove it then press“Start”.
66.12.33 Output Device Failure TOO MANY PAGES IN JOB TO STAPLE
68.X PERMANENT STORAGE FULL Tocontinue touch OK Tray {X} Empty
68.X PERMANENT STORAGE WRITEFAIL To continue touch OK Tray {X} Open
68.X STORAGE ERROR SETTINGSCHANGED To continue touch OK Type Mismatch In Tray {XX}
69.X ERROR To continue turn off then on Unable to connect
8X.YYYY EIO ERROR UNABLE TO COPY
8X.YYYY EMBEDDED JETDIRECT ERROR UNABLE TO SEND
99.XX.YY Unable to send Fax. Please check faxconfiguration.
Access denied MENUS LOCKED UNABLE TO SEND JOB
ACTION NOT CURRENTLY AVAILABLEFOR TRAY X TRAY SIZE CANNOT BEANY SIZE/ANY CUSTOM Unauthorized supply in use
Authentication information is incorrect.Please re-enter information. User Name Job Name or PIN is missing.
Authentication required User name or password is incorrect.Please re-enter.