HP Color Laserjet 4650 Printer

Error Codes and Support

Error:

10.10.YY SUPPLY MEMORY ERROR INSTALL SUPPLIES
10.30.YY INSTALL TRANSFER UNIT
10.XX.YY SUPPLIES ERROR LOAD TRAY xx: {TYPE} {SIZE}
10.XX.YY SUPPLY MEMORY ERROR LOAD TRAY xx:{TYPE} {SIZE}
13.01.00 JAM IN TRAY x Loading program
13.02.00 JAM IN TRAY x MANUALLY FEED{TYPE} {SIZE}
13.02.00 JAM INTray X Moving solenoid
13.05.00 JAM IN PAPER PATH No job to cancel
13.09.00 JAM IN TOP COVER AREA NON HP CARTRIDGE DETECTED
13.0A JAM IN TOP COVER AREA NON HP CARTRIDGE IN USE
13.0A.00 JAM IN TOP COVER NON HP SUPPLY DETECTED
13.12.00 JAM IN DUPLEX PATH NON HP SUPPLY IN USE
13.12.00.JAM IN DUPLEX PATH OPTIONAL TRAYS NOT SUPPORTED
13.20.00 JAM IN TOP COVER AREA ORDER {COLOR}CARTRIDGE
13.XX.YY JAM IN PAPER PATH ORDER FUSER KIT
13.XX.YY.DUPLEX JOB INTERRUPTED ORDER SUPPLIES
13.XX.YY.JAM IN DUPLEX PATH ORDER TRANSFER KIT
13.XX.YY.JAM IN PAPER INPUT PATH OUTPUT BIN FULL
13.XX.YY.JAM IN TRAY 1 Paused
13.XX.YY.JAM IN TRAY 2 Performing PAPER PATH TEST
13.XX.YY.JAM IN TRAY 3 Performing PRINT/STOP TEST
20 INSUFFICIENT MEMORY Performing upgrade
22 EIO X BUFFER OVERFLOW please wait
22 PARALLEL I/O BUFFER OVERFLOW Powersave on
22 SERIAL I/O BUFFER OVERFLOW Printing
40 BAD SERIALTRANSMISSION Printing CMYK SAMPLES
40 EIO X BAD TRANSMISSION Printing CONFIGURATION
41.3 UNEXPECTED SIZE IN TRAY XX Printing DEMO PAGE
41.5 UNEXPECTED TYPE IN TRAY X Printing EVENT LOG
41.5 UNEXPECTED TYPE IN TRAY XX Printing FILE DIRECTORY
41.X PRINTER ERROR Printing FONT LIST
49.X PRINTER ERROR Printing MENU MAP
50.X FUSER ERROR Printing PQ TROUBLESHOOTING
51.XY PRINTER ERROR Printing REGISTRATION PAGE
52.XY PRINTER ERROR Printing RGB SAMPLES
53.10.05 PRINTER ERROR Printing SUPPLIES STATUS
53.X0.ZZ PRINTER ERROR Printing USAGE PAGE
53.XY.ZZ CHECK RAM DIMM SLOT Processing
54.20.00 PRINTER ERROR Processing copy {X} of {Y}
54.X PRINTER ERROR Processing duplex job
54.XX.00 PRINTER ERROR Processing from tray XX
55.01.XY DC CONTROLLER ERROR RAM DISK DEVICE FAILURE
56.XX PRINTER ERROR RAM DISK FILE OPERATION FAILED
57.3 Cartridge fan error (F2) RAM DISK FILE SYSTEM IS FULL
57.4 Formatter fan error (F1) RAM DISK IS WRITE PROTECTED
57.X PRINTER ERROR Ready Diagnostics mode
58.X PRINTER ERROR Receiving upgrade
59.XY PRINTER ERROR REGISTRATION PAGE
59.XY PRINTER ERROR CONTINUED REINSTALL {COLOR} CARTRIDGE
62 NO SYSTEM REMOVE ALL PRINT CARTRIDGES
64 PRINTER ERROR REMOVE AT LEAST 1 PRINT CARTRIDGE
68.X PERMANENT STORAGE ERROR REMOVE AT LEAST ONE PRINT CARTRIDGE
68.X PERMANENT STORAGE FULL REPLACE {COLOR} CARTRIDGE
68.X PERMANENT STORAGE WRITE FAIL REPLACE {COLOR}CARTRIDGE
68.X STORAGE ERROR SETTING CHANGE REPLACE FUSER KIT
79.XXXX PRINTER ERROR REPLACE SUPPLIES
8X.YYYY EIO ERROR REPLACE SUPPLIES Printing black only
Access denied menus locked REPLACE TRANSFER KIT
BAD OPTIONAL TRAY CONNECTION Request accepted please wait
Calibrating Resend upgrade
Canceling Resendupgrade
Checking paper path Resetting kit count
Checking printer Restoring
CHOSEN PERSONALITY NOT AVAILABLE Restoring factory settings
Clearing event log Rotating {color} cartridge motor
Clearing paper path Rotating {color} Laser Scanner
CLOSE FRONT COVERS Rotating {color} motor
CPR SENSOR OUT OF RANGE Rotating alienation motor
DATA RECEIVED Rotating belt drive
Deleting Rotating fuser motor
DETECTABLE SIZE IN TRAY xx Rotating motor
DISK DEVICE FAILURE Rotating transfer motors
DISK DEVICE OPERATION FAILED Setting saved
DISK FILE OPERATION FAILED SIZE MISMATCH TRAY xx= {SIZE}
DISK FILE SYSTEM IS FULL SIZE MISMATCH TRAY XX={SIZE}
DISK IS WRITE PROTECTED STORAGE ERROR
DISK X INITIALIZING TRAY xx {TYPE} {SIZE}
EIO DISK X Initializing TRAY xx {TYPE} {SIZE} Size detected by tray
EIO DISK X NOT FUNCTIONAL TRAY XX {TYPE} {SIZE} Size specified by user
EIO DISK xNOT FUNCTIONAL TRAY xx CONTAINS UNKNOWN MEDIA
Event log empty TRAY xx EMPTY {TYPE} {SIZE}
FLASH DEVICE FAILURE TRAY xx OPEN
FLASH FILE OPERATION FAILED TRAY XX SIZE= { SIZE}
FLASH FILE SYSTEM IS FULL TRAY XX SIZE= { SIZE} Recommend move switch in tray toSTANDARDthen close tray
FLASH IS WRITE PROTECTED TRAY XX SIZE= { SIZE} Setting not savedTo change move tray switch toCUSTOM
If no paper in tray :MANUALLY FEED {TYPE} {SIZE} TRAY XX SIZE= { SIZE} Setting not savedTo change size move guides in tray
If no paper in tray: MANUALLY FEED {TYPE} {SIZE} TRAY XX SIZE= { SIZE} Setting saved
INCORRECT {COLOR} CARTRIDGE TRAY XX SIZE= { SIZE} Setting saved To change move tray switch toSTANDARD
Incorrect PIN TRAY xx SIZE= {XXXX SIZE}
INCORRECT SUPPLIES TYPE MISMATCH TRAY xx= {TYPE}
Initializing Unable to mopy job
Initializing permanent storage Unable to store job
INSERT OR CLOSE TRAY xx USE INSTEAD TRAY 2 OR TRAY 3:(SIZE) {TYPE}
INSTALL {COLOR} CARTRIDGE USE TRAY XX {TYPE}{SIZE}
INSTALL {COLOR}CARTRIDGE Wait for printer to reinitialize
INSTALL FUSER Warming up