HP Color LaserJet 3600 Printer

Error Codes and Support

Error:

13.01.00 JAM IN TRAY 2

Error Description:

A page is jammed in tray 2. The printer attempted to feed paper from tray 2 (main cassette), but the leading edge did not get to the top-of-page sensor in time.

Solution:

1. Check the registration flap for proper orientation; it should pivot freely to allow paper to feed from tray 2 or tray 1/3. 2. Check the T2 pick roller lock mechanism. 3. If using OHT, Label, or 120 g/m2 media, follow restricted loading procedures (only 50 sheets of OHT/ Label media or 100 sheets of 120 g/m2 media may be loaded at one time). The lift plate springs are not stiff enough to handle greater quantities. 4. Verify that the media basis weight does not exceed 120 g/m2. If it does, run media from tray 1. 5. Inspect the paper-length adjustment guide and verify that it is set correctly. 6. Inspect the tray 2 paper-present sensor to make sure it is not stuck in the up position. Rotate the sensor upward and release; if it drops without hesitation, it is operating properly. 7 if error still persists, replace paper pickup assembly

HP RM1-2755-080CN Paper Pick-up Assembly

MFG Part Number: RM1-2755-080CN     Condition:Refurbished    MFG:HP

This HP RM1-2755-080CN is Genuine and works with the HP 3600, HP 3800, HP CP3505 Printer series. Parts are thoroughly tested, inspected for damage & defects and guaranteed 100% fully functional.

$27.00

HP RM1-2755-080CN Paper Pick-up Assembly

MFG Part Number: RM1-2755-080CN     Condition:Oem    MFG:HP

This HP RM1-2755-080CN is Genuine and works with the HP 3600, HP 3800, HP CP3505 Printer series. Parts are thoroughly tested, inspected for damage & defects and guaranteed 100% fully functional.

$69.00

NEW PICKUP ASSEMBLY,PAPER

MFG Part Number: RM1-2755-080CN     Condition:New    MFG:PC-WHOLESALE-EXCLUSIVE

$119.95

Call for Assistance 844-755-3000