HP Color LaserJet M3027 MFP Printer

Error Codes and Support

Error:

68.X Permanent storage full

Error Description:

The device NVRAM is full or the storage device is failing to write. Some settings saved in the NVRAM might have been reset to the factory defaults. Printing can continue, but some unexpected functions might occur if an error occurred in permanent sto

Solution:

Touch OK to clear the message. If the message is not cleared, turn the device off, and then turn the device on. 68.0, onboard NVRAM 1. If the message persists, perform an NVRAM initialization (see Service mode functions on page 226). Make sure that you read and understand the caution and the note in that section. 2. If, after performing an NVRAM init, the message persists, replace the formatter (see Formatter on page 116). 68.1, disk drive 1. Use the HP Web Jetadmin software to delete files from the disk drive. 2. If, after deleting files from the disk drive, the message persists, reinitialize the disk drive (see Service mode functions on page 226). Make sure that you read and understand the caution and the note in that section. 3. If, after reinitializing the disk drive, the message persists, replace the disk drive (see Disk drive on page 113).


Call for Assistance 844-755-3000